Skymaster DXS 23, Operating Instructions Manual

Page: 14 / 24

GB 12
7. The OSD menu – installation
2.4 Individual satellite search
2.4.1 Satellite
Select a preset satellite from the list. If the desired satellite is not listed, you have to add the
satellite as described under point 2.2.
2.4.2 Only FTA
Decide whether you wish to store only FTA or also coded channels. We recommend you to select
the setting “OK (yes)” in order to filter the coded channels.
2.4.3 Search
Decide whether you wish to search for TV channels and/or radio stations.
2.4.4 Network search
The ASTRA (19.2° East) and HOTBIRD (13° East) satellites offer a so-called network search. These
satellites transmit a table (NIT = Network Information Table) via all the available channels.
Therefore, the satellite receiver can read all the channels.
2.4.5 Search mode
Autom. search Automatic search of all the available transponders of a satellite position.
Preset search Starts the search with the factory default transponders.
2.4.6 Search
Starts the search after pressing the [OK] button.
2.5 Multi-satellite search
2.5.1 Satellite
Overview of the satellites which are actually searched for during the multi-satellite search.
Information on the settings is stated above (2.4.2-2.4.6).