Skymaster DVR 7400 Operating Instructions Manual Download Page 24

64

11. Channel Manager

39740

Lock Channels
Open the TV channel manager menu, press the green button and select “Lock”.

Use this function to lock any channel against unauthorised access. Firstly, select
the channel to be locked and then press OK. The lock symbol 

appears next to

the channel.
Note: The 4-digit code has to be entered to lock or unlock one or several channels.
Locked channels, e.g. with images not suitable for minors, can only be watched
after the code has been entered (presetting 0000).

Rename Channels
Open the TV channel manager menu, press the green button and select “Rename”.

Use this function to allocate a new name to any channel. Firstly, select the channel
from the list and then press OK.
The channels can be renamed via the on-screen keyboard. The new name appears
in the channel list once the channel has been renamed.

TIP: In order to change the name of a channel quickly, the menu can be opened
directly: Press - while watching the TV channel - OK and subsequently INFO.

Press OK to open the “Keyboard”.

Delete Channels
Open the TV channel manager menu, press the green button and select one of the
desired delete options.
These functions enable you to delete individual channels or all of the channels.

Mark the channels to be deleted via “OK”. An X symbol 

appears next to the

channels.

Once selection has been completed, press EXIT. Confirm the safety query via OK to
completely delete the channel(s).

Check successful deletion in the channel list.

Summary of Contents for DVR 7400









































Reviews: