NOTE: The flap servos are located inside the fuselage. It is very important to match the flap
slot with servo actuator. If you use other servos than JR, you will need to modify the height
of the servo for best fit.
Fit 2 L-shape servo brackets to DS8911 servos and secure to inside root of fuselage.
Flap servo horn 30mm facing rear and parallel to thrust line. Install nipple to horn.
Use loctite.
Secure extension wire. Use safety clips on joint.
Trial fit wing to fuselage and check nipple alignment in flap slot.
The flap can be removed via pin hinge.
Check video to show assemble of flap :
http://youtu.be/08hA0KalZvg
P-13
Assembly & Operation Manual
Photo 22
Photo 24
Photo 23
Photo 26
Photo 25
Photo 27
