Mounting_instructions_Flex_2.0
5/24
01/10/2021
3 General
The iDome Flex 2.0 or iWindow2-3 Flex 2.0 is the openable hybrid/flat glass skylight for applications in flat roofs
with integrated 230 V chain actuator in the frame.
Rain detection is included as standard, which closes the skylight automatically in case of precipitation.
This openable skylight is suited for fresh air ventilation.
Motor stroke length 25 cm.
4 Important information
- Read instructions carefully before installation. Keep these instructions for future reference.
- The operating voltage is 230 V AC.
- Routing or installing of electrical cables and connections may only be performed by specialised companies.
- Your Flex 2.0 product is designed to be used with a
switch which automatically returns (spring loaded) to the
OFF-position when not pressed! Using a non-momentary switch which stays in either up or down position
WILL cause damage to the chain actuator.
- To avoid crushing of body parts, the zone of the openable section must always be avoided during installation.
- Do not paint or lacquer the rain sensor.
- Dirt on the rain sensor may cause operating problems. Therefore, it is recommended to clean the rain sensor
with a soft wet cloth once or twice a year or when required.
Before starting the installation or maintenance of the iWindow or iDome Flex 2.0, all necessary safety measures
must be fulfilled. The iWindow2/3 Flex 2.0 or iDome Flex 2.0 needs to be installed by a professional.
Ask for the Declaration of performance (DoP).
5 Before starting the installation of your Flex 2.0 product
- Check your roof inclination:
iDome Flex 2.0 : MIN. 0° - MAX. 25°
iWindow2/3 Flex 2.0: MIN. 5° - MAX. 25°
- A base curb is not included in your Flex 2.0 product. The base curb must comply to the requirements stated
in point 8 of this manual: “Requirements base curb (not included in the Flex product)”.
- An operating voltage of 230 V AC is necessary during installation.
- Provide suitable lifting gear or sufficient manpower (at least 2 persons) to install the heavy glass product.
OPEN
CLOSE
COM
Spring automatically
returns switch to OFF-
position when not pressed