20/24
Mounting_instructions_Flex_2.0
01/10/2021
16.1 Electrical connection WITH rain sensor
Wiring diagram for connection of single or double actuator. Both versions have the same cable output.
Use this diagram if your Flex 2.0 product is equipped with a rain sensor:
(*)
WARNING
Only use a switch which automatically returns (spring loaded)
to the OFF position when not pressed!
Connect the grey (GY) wire to the live wire of your 230 V mains power.
Connect the blue (BU) wire to the neutral wire of your 230 V mains power.
Connect the green/yellow (GN/YE) wire to the ground of your mains power.
Connect the white wire to the common contact of your switch.
Connect the brown wire to the “open” contact of your switch.
Connect the black wire to the “close” contact of your switch.
COM
CLOSE
OPEN
FLEX 2.0
RAIN SENSOR
GY (grey)
BU (blue)
GN/YE (green/yellow)
BN (brown)
BK (black)
WH (white)
230V AC
L
PE
N
OPEN
COM
CLOSE
SWITCH (*)