88
• Avoid heat and flames,
Inspection and service life
A regular review of local regulations is required. In Europe, for
example, an annual audit by an expert is necessary. The
replacement state depends on the product, its frequency of use
and the external application conditions. All PPE unavoidably loses
durability over the course of its service life. This is accelerated by
UV rays, heat, chemicals, aggressive atmospheres, dirt. You must
do a review and documentation of the whole system with all single
components according to local legislation (min. once a year), by an
expert. For the documentation you find a controll card under point
6).
Maintenance and storage
The manufacturer’s liability for defective products does not include
damage to property or personal injuries, which can occur even for
correct use and application of personal equipment. This
Manufacturer‘s liability will be rendered null and void, if the
equipment is modified, or local regulations are not complied with or
followed, or the equipment/component instructions are not made
available to the user individually by the Competent Person . It is
imperative to carry out a visual and functional check of all
components (other than emergency or sealed equipment) prior to
each use. Repair work shall only be performed by the manufacturer,
or authorized SKYLOTEC service agent, periodic checks may only
be carried out by technical experts, with the manufacturer’s
instructions precisely followed. Allow any equipment that becomes
wet, dry naturally, and do not directly expose it to the effects of
heat.
• Hand wash up. 40° C (104 degrees F).
• Dry and store at room temperature.
• Store dry and protected from light.
• Do not tumble dry or wash, do not bleach.
• Do not contact with harsh substances.
• Mark only on labels or with permanent marker (Edding 3000)
and make a note in the log book.
Please contact the manufacturer if you have any doubt. If any faults are
picked up during inspection, the product must be replaced.
6.) Identification and warranty certificate
a) Product name
b) Product number
c) Size / length
d) Material
e) Serial no.
f) Month and year of manufacture
g 1-x) Standards (international)
h 1-x) Certification number
i 1-x) Certification centre
