SKYLOTEC ACX, Instructions For Use Manual, Page: 24 / 104

24
3.6) BASIC Lifting Safety Rules
Always keep an eye on the load while lifting
Do not exceed the Safe Working Load (SWL) of the entire lifting system
Do not try to lift fixed or obstructed loads
Do not side-pull loads
Avoid excessive inching (i.e. short pulses of the motor)
Stay clear of the load whilst lifting
Do not stand under the suspended load
Use hand signal or radio communications during lifting operation
3.7) Lifting setup
Displayed here are the four standard lifting setups that are suitable for use with the ACX Ascender. They are shown for illustration purposes only. For
specific guidance, please contact SKYLOTEC or an SKYLOTEC distributor.
WARNING: DO NOT let the rope become obstructed or blocked when going into the Ascender. The Ascender operator should, at all times, control the
unloaded rope during lifting operations to avoid the rope from twisting when running into the Ascender.