Calling up the OSD menu
Press the menu button to call up
the main menu resp. to choose and
confirm menu items.
see page 5 and 6
UP
DOWN
RIGHT
LEFT
Controlling the OSD menu
These buttons are needed to navi-
gate the OSD menu.
see page 5 and 6
Congratulations on your new video indoor station with
optional external image buffer, camera control* and more!
BRUskyline
version 1.0
LED indications
LED 1 | green
is ON
connected sensor is active
* ends the voice communication after 4 seconds.
automatic call cut-off after 2 minutes.
LED 2 | red
is ON
door release automatic or
call diversion is activated
LED 3 | yellow
is ON
external image buffer is activated
Use
A ring tone signals an
incoming call.
The green LED 5 is ON.
Speaking
Press the speech button shortly
to accept the call or longer than 1
second in order to switch on simplex
communication during voice commu-
nication.
The green LED 5 is ON.
Press the speech button again short-
ly or the blue door release button*
to end the voice
communication.
* ends the voice communication after 4 seconds.
automatic call cut-off after 2 minutes.
Open the door
Press the door release button shortly
to open the door.
Switch-off the ring tone
Press the call OFF button. In case of
an incoming call, no acoustic signal
sounds.
The red LED 4 is ON.
Switching lights
Press the function key shortly to
switch the lights.
With the function key you can make internal calls,
trigger a control function, (de-)activate call diversion
or door release automatic. This requires the configu-
ration by a qualified electrician – see configurable
functions.
Switching the image
Press the image button shortly to
show the image of the front-door
station on display.
also see additinal functions
Storing an image
Press the image buffer button
shortly when the image is activated
in order to manually store an image.
Press the image buffer button when
the image is switched-off and the
yellow LED is blinking in order to call
up stored images . By holding the
key, you (de-) activate the automatic
image recording when a door call is
made.
The yellow LED 3 is ON.
see page 9
LED 4 | red
is ON
call OFF is activated
LED 5 | green
is ON
incoming door or internal call
activated voice communication
blinks
speech / video channel is busy
LED 6 | blue
is ON
device is operational
flickers
error message
Side 2
