background image

PN 38035_C 

page 8 of 9

©2018 Skyline Exhibits            TradeWinds® is a registered trademark of Skyline Exhibits

Tradewinds Immerse™ Display System Setup Instructions

Shoe Box Shelf (Continued)

3.  Attach side panels to top panel 

by inserting hubs on edge of 
top panel into corresponding 
grooves on side panel. Lock 
panels into position by aligning 
panels flush.  Assembly of shoe-
box shelf is now complete.   
     
    

4.  Stand behind your frame 

to Insert the shoebox shelf. 
Ensuring the grooves on the 
bottom panel rest on the frame  
cross braces.  

 

5.  Install the front graphic into 

the channel of the shoebox 
shelf by turning the stitching 
into the channel groove. Install 
the optional back graphic 
into the channel on the back 
of your shoebox following 
the same process as the front 
graphic. 

6.  Rest your standard inset shelf 

into the shoebox on the metal 
rungs. Place up to 1 lb. of 
weight on this shelf.

7.  If you purchased the additional 

heavy duty inset shelf for 
your shoebox shelf, line up 
the notches in the shelf to the 
metal rungs. Place up to 10 lbs 
of weight on this shelf.  

Do not exceed 30 lbs of combined 
weight on this frame.

8.  Attach the lighting cord to your 

power supply.  

 

 

Optional Heavy Duty Shelf

Standard Shelf

Cross Brace

Summary of Contents for Tradewinds Immerse










Reviews: