Skyjack ZB12032, Operating Manual

Page: 22 / 73

TM
Page 22 December 2007
ZB12032
Section 2 - Operation Component Identification
8. Frame Level / Pipe-grappler Attachment
Joystick
- This joystick controls the relationship of
the telehandler frame to the front axle. The joystick
returns to neutral when released.
To level frame to the right, move joystick to the
right. To level frame to the left, move joystick to
the left.
To open grappler primary clamp, press and hold
left-side switch while pulling joystick backward.
To close primary clamp, press and hold left-side
switch while pushing joystick forward.
To open grappler secondary clamp, press and hold
right-side switch while pulling joystick backward.
To close secondary clamp, press and hold right-
side switch while pushing joystick forward.
9. Light Switches (If Equipped) - These switches
turn lights on or off.
10. Boom Controller Console Lever - This lever
allows the operator to adjust the position of the
controller box.
11. Accelerator Pedal - Depress pedal to increase
speed and release pedal to decrease speed.
12. Service Brake Pedal - The service brake is
foot operated and is used to decrease speed or
stop.
13. Transmission Lever Neutral Lock Switch - This
two-position switch locks/unlocks forward or
reverse movement of transmission lever.
14. Capacity Charts - This set of charts indicates
operating limits specific to a telehandler model
and attachments. Refer to
Section 2.11


















8
10
12
9
11