Skyjack ZB12032, Operating Manual

Page: 20 / 73

TM
Page 20 December 2007
ZB12032
Section 2 - Operation Component Identification
2.5 Component Identification
The following descriptions are for identification,
explanation and locating purposes only.
2.5-1 Operator’s Cab
The operator’s cab allows vision from all sides and is
equipped with a rollover and falling object protective
structure.
wARNiNG
The operator’s cab provides a falling
object protection structure (FOPS) and
a rollover protection structure (ROPS).
Do not make any modification to this
structure. If damaged, the cab cannot be
repaired. It must be replaced.
A fully-enclosed cab with windows and door is
available as an option. Included in this option is the
windshield wiper, interior light and air heater/defroster.
Air conditioner tis also available as an option for fully
enclosed cab.
The operator’s seat is equipped with a seat belt. Use this
seat belt at all times when operating telehandler.
Figure 2-1 Telehandler Seat
Seat Belt
Height Adjustment
Ride Control
Adjustment
Fore/Aft
Lock Lever
Seat
The telehandler seat is equipped with devices which
allow for the adjustment of seat height and distance
from the controls. Adjust the seat so that foot pedals,
steering wheel and instrument panel controls are within
easy reach of the operator.
The height adjustment is located on the front of the seat
and is operated by turning the rotary knob. Clockwise
rotation lowers the seat, counter clockwise raises the
seat.
The ride control is located on the left of the seat and
is also operated by means of a rotary knob. Clockwise
rotation decreases the firmness while counterclockwise
rotation increases the firmness.
The fore and aft lock lever is located on the front- left
corner of the seat. Pushing the lever to the left unlocks
the seat, allowing fore and aft adjustment.
wARNiNG
The seat belt must be worn at all times.
Manual Storage Box
This weather-resistant box is mounted at the back
of the operator’s seat. It contains
operating manual and other important
documentation. The operating
manual for this make and model
of telehandler must remain with the
telehandler and should be stored in
this box.