Skyjack SJ 46A, Operating Manual

Page: 74 / 85

SJ 46A & SJ 46AJ
December 2007 Page 75
TM
Section 2 - Operation Labels
No. Label Pictorial Description
11
Base Control Console
Push “ ” breaker back in to reset. Select and hold
“ ” to enable error blink code for engine control unit (ECU).
Read “ ” operating manual.
Select
“ ”
to enable base control console, “ ” to turn engine off
or “ ” to enable platform control console.
Push “ ” emergency stop to stop engine and disable controls.
Select “ ” to extend fly boom or “ to retract fly boom.
Select “ ” to rotate platform to the left or “ ” to rotate to the right.
Select “ ” to tilt platform up or “ ” to tilt platform down.
Select
“ ”
to move jib up or
“ ”
to move jib down.
Select
“ ”
to rotate turret to the left or
“ ”
to rotate to the right.
Select “ ” to raise riser or “ ” to lower riser.
Select
“ ”
to raise main boom or
“ ”
to lower main boom.
Push and hold “ ” to start engine or “ ” to enable the
emergency power unit.
Push and hold “ ” in either direction to enable base control
functions.
11
Control Compartment (Continued)