04
Check if the Juice Extractor is firm in its position. Before using it,
wash part sin contact with the food with neutral soap and water.
3. Operation
3.1 Starting
IMPORTANT
Always wait until the motor complete stop before changing the
crown.
Make sure the Crown is properly fitted.
To start operating turn ON the ON/OFF switch # 05 (Pic-1) located on
the Base # 06 (Pic-01).
3.2 Feeding Procedures
Juice Extractors work with high speed. First, cut the oranges or the
lemons in two halves.
Turn the machine on, hold half of the fruit and press it down firmly
against the crown # 09 or #10 (Pic-01) and the juice will run into the cup #08
(Pic-1) going first through the Sieve #07 (Pic-01).
3.3 Cleaning
IMPORTANT
Never clean the machine when it is connected to a power point,
always unplug the machine before cleaning. Before taking out the
crown, be sure the motor has come to a complete stop.
All removable parts must be removed and washed.
Follow the below instructions for washing removable parts:
3.3.1 Turn off the machine and unplug it.
3.3.2 Remove the Lid # 01 (Pic-01), the Crown # 09 or # 10 (Pic-
01) and then the Juice Chamber # 02 (Pic-01)
3.3.3 Wash all removable parts with running water and neutral
soap and dry them.
3.3.4 To reinstall them, follow the above order inversely.
Summary of Contents for Skymsen EXI
Page 2: ......