background image

Skye Instruments Ltd.

Skye Instruments is based in the UK and we are very proud to be celebrating being in business since 

1983. Our products are designed and built in the UK. We have a very wide product base and our 

sensors & systems are used for plant & crop research; micro-climate, global climate change studies; 

environmental monitoring and controlled environment installations.

Products include light sensors & systems, weather monitoring sensors, automatic weather stations, 

plant research systems, soil and water research systems.

Feel free to contact us via our e-mail, or any of the methods below:

Click on the icons to browse to the sites, or search for the usernames below.

Have a Smartphone? Scan this QR code to access our website for more information about your  

product:

Please be aware that the information in this manual was correct at time of issue, and should be 100% relevant to  

the accompanying product. We take great pride in our ever-evolving range of products, which means that sometimes  

the product may change slightly due to re-design. 

If you have any queries, please do not hesitate to contact our technical team by any of the methods above.

Skye.Instruments

Skye Instruments Ltd. @SkyeInstruments

SkyeInstrumentsVideo

Skye Instruments Ltd.

Summary of Contents for SKP 125 VS













Reviews: