12
|
ENGLISH
Image 14
– Place SkyBell
3.4 Turn on the power
Switch on the mains power or power adapter again
Image 15
– Turn on doorbell transformer
3.5 Check the SkyBell LED status
You can now check the status LED on the SkyBell, this should blink red. This may
take some time before the LED starts to blink. It is also possible that your doorbell
chime is making a light noise. The doorbeel chime works as a resistor and the internal
battery of the SkyBell is charged at this moment.
If the LED is blinking slowly the battery is being charged. This may take up to 10
minutes. If the LED is blinking rapidly (about 1 time per second) the SkyBell is ready to
be connected to your smartphone (synchronised)
No LED is lit at all? Check the wiring of the SkyBell or tighten the cable connectors
better to solve this.
