Your hub won’t start working until
the date you see on the box - it
can be any time up to midnight.
Sky Broadband Hub
Some paperwork
Grey cable
Microfilter
Power cable
LED status lights
WPS button and light
(Wi-Fi Protected Setup
TM
)
Take the grey cable from
the box.
Plug one of the purple ends
into the purple port on your
microfilter.
Plug the other purple end
into the purple port on the
back of your hub.
If you’ve unplugged a phone
cable or splitter, plug it into
the ‘Phone’ port on the
microfilter.
Take the microfilter from
the box.
Plug it into the phone socket.
Take the power cable from
the box.
Plug the blue end into the
blue port on the back of your
hub.
Then plug the other end into
the mains and switch on.
The power, internet and wifi
lights on the front of your
hub should go green after
few minutes
You’re good to go.
Need more help setting up?
Go to
sky.com/hubsetup
Broadband Telephone Power Ethernet Reset
WiFi name and password details
Your hub works best if you leave it
switched on all the time. Don’t worry
if it feels warm – that’s normal.
Warning
Please read the ‘Important safety and
product information’ leaflet before
installing or using your hub.
Find your main phone
socket.
It’s usually where the phone line
comes into your home and thicker
than the others.
Unplug whatever’s
plugged in.
Phone cables, broadband
equipment, splitters and so
on.
If your phone socket
looks like this (with two
ports), skip to the ‘If your
phone socket has two
ports’ section overleaf
OR
2
1
3