10
Flying
Step 1
Power ON the craft and place it on a flat
surface. This is necessary for the craft’s
gyroscopes to properly align. The lights on
the craft will blink as it searches for a signal
from the remote.
Be sure the craft and yourself are facing
the same forward direction, this will help
with orientation while flying.
Step 2
Power ON the remote. The light on the remote will blink as it searches for the signal from
the craft. An audible chime will sound when the remote and the craft have linked.
Step 3
Push the
Left Control Stick (throttle)
fully
forward, wait for a chime to sound, then pull
the stick fully rearward, and wait for a second
chime.
When this last chime has sounded the
craft is ready to fly.
Step 4
Press the
Start/Landing button
to start the
rotors. The drone will take off and hover at a
set altitude. Use the controls sticks to fly.
Press the
Start/Landing button
again to automatically land the drone and stop the rotors.
Front
Remote Link & Calibration
Before flying, the craft and the remote must be linked together and the gyroscopes on the
craft must be allowed to calibrate.
Begin with the battery installed, the battery compartment closed, and the craft and
remote powered OFF.
