sky rider Hawk DR108, User Manual

Page: 24 / 32

24
Parts & Repair
Rotor Replacement
The craft comes with replacement rotors if
the originals are broken or badly damaged.
To replace a rotor, pull it upwards and off of
the motor shaft, then place the new rotor
on the shaft and gently push down. Take
special care not to bend or break the motor
shaft. If the rotors are difficult to remove by
hand, try a small set of tweezers or pliers.
It is extremely important to use the
correct rotor for replacement.
Using
the incorrect rotor will make the craft
impossible to control. The marking can be
seen on the rotor near the center.
Rotor
A
Rotor
A
Rotor
B
Rotor
B
Matching rotors should
be diagonally opposed.