21
If you are experiencing problems using or flying the craft, consult this table.
PROBLEM
POSSIBLE CAUSES
SOLUTION
Craft does not
respond to controls.
• No power to remote
or craft.
• Poor contact between
power plugs.
• Craft is out of range.
• Check remote batteries,
replace if needed.
• Check craft battery, be
sure it is fully charged.
• Be sure the power
plugs are firmly
connected.
• Be sure the remote has
an unobstructed line of
sight to the craft.
• Remain within the
remote’s 150 ft. range.
Craft drifts
while in flight.
• Trim not set or needs
adjustment.
• Adjust trim settings
(see pg. 12).
Craft is difficult
to control or flies
erratically.
• Gyroscopes misaligned.
• Trim settings too far
out of adjustment.
• Damage to body,
rotors or other major
components.
• Recalibrate gyroscopes
(see previous page).
• Reset remote
(see previous page).
• Repair or replace parts
as needed.
LED lights ON
but craft does not
respond to controls.
• Low battery power.
• Recharge the battery.
