APPENDIX
1. Set up RF code
On standby mode: Press * 8566 # >
▲
/
▼
to scroll>
(Refer to: Edit RF Sensor
)
■
To create a new defense area:
The terminal supports maximum 16 sensors for gas leaking,
door-open, smoke and infrared detectors and so on. Different defense
areas should be related to different RF codes first before use.
> 1.Defense Area
> OK
>
MENU: Delete/Edit>Edit and Input (1-10) > OK
>
Choose Type: Main/Normal>OK
>
Step(according to Instruction)
>
Turn on sensor, LCD read Rec Code: xxxxxx
>
Turn off the sensor and press
▲
,
错误！链接无效。
Repeat the previous steps
again.
Turn on the sensor and press
▲
>
the related RF code will be saved.
■
To create new Remote controller:
Maximum 5 remotes are supported. The remote controllers will be
listed in the menu.
>2. Remote Key
> OK > Edit >OK
>
Steps (according to Instruction)
>
press any key of controller, LCD read: Rec Code xxxxx
press
▲
>
Repeat the previous steps again:
press the
same key
of controller and then press
▲
>
Choose: Child key Function
- 25 -
