5.5. Alarm Setup
1. Recipient No
2. Power Failure
3. All Arm Delay
4. Alert Delay
5. Change PWD
6. Edit RF Sensor
MENU>5. Alarm Setup>PWD>OK>
5.5.1 Recipient No:
7. RF Code Query
>1. Recipient No > OK
>MENU---> Delete: delete the number in cursor
>Edit >OK > > OK
> Save OK!
Input a recipient’s number
(mobile phone / PSTN)
Note:
■
There could be 3 recipients at most.
Max number 14 digits. The 1st
recipient should never be NULL.
■
In alarm status, the terminal will send alert SMS to the mobile phone
recipients and call all recipients in sequence to report alert and
monitor the situation.
5.5.2 Power Failure
>2. Power Failure >OK> On/Off >OK
Note:
■
User chooses
On
: When AC power failure, the terminal will send an
alert SMS to the 1st recipient.
■
In power failure status, will disappear. The backup battery starts
supplying power. will display in LCD.
5.5.3 All Alarm Delay
>3. All Alarm Delay >OK>
▲
/
▼
to scroll> OK to save.
Not
e:
■
You will be able to configure the delay time of All Alarm. It is used to
prevent false alerts when the owner still stays at home on All Alarmed
Mode.
■
There is no delay for Local Armed Mode.
- 17 -
