background image

AL-500P-II 12 

12/15/1999 

FCC Notice 

 

WARNING: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to 
Part 15 of FCC Rules.  These limits are designed to provide reasonable protection against harmful interference when this 
equipment is operated in a commercial environment.  This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio 
communications.  Operation of this equipment in a residential area is likely to cause harmful interference in which case 
the user will be required to correct the interference at his/her own expense. 
 
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the 
Radio Interference Regulations of the Canadian Department of Communications. 
 
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils 
numériques de la Class A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des 
Communications du Canada. 

 

LIMITED WARRANTY 

 

TERMS

:  Nel-Tech warrants to the original purchaser ("Buyer") that the Product sold is free from 

defects in material and workmanship at the time of purchase.  The warranty extends three (3) years 
from the date of original purchase and covers parts and labor.  Buyer must provide written notice to 
Nel-Tech within the warranty period of any defective part or conditions.  If the defect is not the result 
of improper use, service, maintenance or installation, and if the equipment has not been otherwise 
damaged or modified after shipment, Nel-Tech or its authorized representative shall either replace 
or repair the defective Product at Nel-Tech's option.  No credit shall be allowed for work performed 
by Buyer or unauthorized parties.  Out-of-warranty repairs will be invoiced at the current Nel-Tech 
hourly rate plus the cost of parts, shipping and handling.  IN THE EVENT THAT THE PRODUCT 
SERIAL NUMBER IS MISSING OR HAS BEEN TAMPERED WITH IN ANY WAY, THE 
FOREGOING WARRANTY IS VOID AND WITHOUT EFFECT AND NEL-TECH SHALL HAVE NO 
LIABILITY WHATSOEVER ON ACCOUNT OF DEFECTS TO SUCH PRODUCT.   
 

LIMITATIONS

:  EXCEPT AS STATED ABOVE, THERE ARE NO WARRANTIES, EXPRESS OR 

IMPLIED, THAT EXTEND BEYOND THE SPECIFICATIONS FOR THE PRODUCT.  NEL-TECH 
EXPRESSLY DISCLAIMS ANY WARRANTY, EXPRESS OR IMPLIED, THAT EQUIPMENT SOLD 
HEREUNDER IS OF MERCHANTIABLE QUALITY OR THAT IT CAN BE USED, OR IS FIT FOR 
ANY PARTICULAR PURPOSE.  BUYER PURCHASES AND ACCEPTS EQUIPMENT SOLELY ON 
THE BASIS OF THE WARRANTY HEREINABOVE EXPRESSED.  UNDER NO CIRCUMSTANCES 
SHALL NEL-TECH BE LIABLE BY VIRTUE OF THIS WARRANTY OR OTHERWISE FOR ANY 
SPECIAL, INDIRECT, SECONDARY OR CONSEQUENTIAL DAMAGES TO ANY PERSON OR 
PROPERTY ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT. 
 

REPAIRING OR REPLACING PRODUCT

:  Buyer may obtain the repair or replacement of any 

flawed part or equipment covered under this warranty through Nel-Tech only.  Buyer is responsible 
for all shipping and handling charges in connection with the performance of this warranty.  Products 
returned to Nel-Tech must be securely packaged to prevent damage in transit, freight prepaid, and 
insured for replacement value.  A return authorization number assigned by Nel-Tech must be clearly 
marked on the outside of the shipping container.  Proof of purchase must accompany shipment.  
Items delivered to Nel-Tech without a return authorization clearly marked on the outside of the 
shipping container, and/or without proof of purchase will be refused.  Please contact Nel-Tech at the 
address and phone number below to receive a return authorization number and to arrange for the 
repair or replacement of a flawed part covered by this warranty.  Please indicate the Product's serial 
number in all correspondence;  an authorization number will not be issued in the absence of a serial 
number.  Nel-Tech Labs, Inc., 101 Zachary Road, Manchester, NH 03109-5609, telephone (603) 
641-8844. 

 

This manual Copyright 1993-1999 by Nel-Tech Labs, Inc.  All rights reserved.  No part of it may be 
copied, photocopied, reproduced, translated, or reduced to any electronic medium or 
machine-readable form without Nel-Tech's prior written consent. 
 
Information contained herein is subject to change without prior notification. Nel-Tech Labs, Inc. 
provides this manual without warranty of any kind, expressed or implied.  This user's manual may 
contain technical and/or typographical errors. 
 

Printed in the U.S.A.

 

Summary of Contents for AL-500P-II













Reviews: