manualshive.com logo in svg

SKT 18665004, User Manual

Share
Download
SKT 18665004 User Manual Download Page 38

Replacement saw blades

Replacement saw blades from any reputable manufacturer can be used.
Ensure that any replacement saw blades purchased correspond with the technical 
specifications (blade diameter, bore and max. no load speed) given on page 26 of 
this manual. Contact the manufacturer for further information if required.

Caution! HSS saw blades may not be used.

Caution!

The direction of the arrow on the saw blade must correspond to the 
direction of the arrow on the machine’s housing (12).
Only saw blades which correspond with the technical data given in this 
manual may be used. Ensure that the saw blade’s maximum rpm is at 
least equal to the machine’s maximum no load speed. HSS saw blades 
may not be used.

•

 Retract the protective guard by hand and
carefully remove the saw blade.

•

 Clean the clamping arrangement and
mount the replacement saw blade by
following the above procedure in reverse
order.

Summary of Contents for 18665004




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands