GERMANY
ALLROAD
MOUNTAIN
T25
2
oder
or
!
DICHTMITTEL
SEALANT
DICHTMITTEL
SEALANT
0°C/32°F
z.B./e.g.: 1,85 BAR/26,8 PSI
40°C/104°F
z.B./e.g.: 2,15 BAR/31,2 PSI
20°C/68°F
z.B./e.g.:
2 BAR/29 PSI
INDOOR
OUTDOOR
DICHTMITTEL
SEALANT
DICHTMITTEL
SEALANT
MAX
MAX
3.
MAX. 8,3 BAR / 120 PSI
BAR/PSI
MANUAL
¬
AIRSPY TL
¬
11757 + 11770 + 11857 + 11858
The AIRSPY sensor housing should be fitted in line with the spokesand
without gap to the rim. Fit the securing nut firmly on the valve adapter.
Preinstal the tyre and add sealant.
Mount tire completely.
3. Setting tyre pressure
The influence that the temperature has on the tyre pressure:
The air temperature has a noticeable influence on the tyre pressure. A
temperature increase of 1°C results in a pressure increase of 1/273 of
the pressure that exists at 0°C. This should be taken into account when
adjusting the tyre pressure. For example:
4. Refilling with Tubeless sealant
Remove the valve core of the AIRSPY valve. Pick up the AIRSPY
applicator with the tubeless sealant. Insert the AIRSPY applicator
through the valve shaft into the tyre. Inject the tubeless sealant into the
tyre. Pull the applicator out of the valve shaft quickly. Clean the valve
shaft, insert the valve core and tighten it by hand using the Presta valve
tool. Tubeless sealant must not be inserted directly through the valve
shaft into the tyre.
Release the knurled nut of the AIRSPY valve core and open it completely.
Place the pump head completely on the AIRSPY valve and move the lock-
ing lever down. Pump the tyre up to the desired pressure. Unlock the pump
head and pull it away from the AIRSPY valve adapter. Turn the knurled nut
of the AIRSPY valve core until it is tightly in position. Replace the valve cap.
