VX-02 ELECTRONIC CROSSOVER
INTRODUCTION
Congratulations on your purchase of the VX-02.
Crossover. We are confident you will find this crossover to be the finest product of its kind in this price range .We
have taken care to include all of the features you need to make your system sound its best. Some of the features
common to VX-02 crossovers are:
·
Back panel switches for selecting the operating mode of the crossover.
·
Back panel switches indicating the selected range of crossover frequencies. Both of these features have LED
indicators on the front panel so you can see at a glance which mode the unit is in.
·
Low frequency summed output designed specifically for mono subwoofer applications.
·
Phase invert switches on all outputs.
·
Individual level controls on every output.
We are sure you will agree that these crossovers are built to provide extremely high quality frequency division for
all applications.
VX-02 FUNCTIONS and PERFORMANCE FEATURES x10 OPERATION
If you are using your system in stereo 2-way or 3-way mode, the needed crossover frequency may be higher than
960 Hz, making it necessary to set the x10 switch to the active position. This changes the range of operation of
the frequency selector from 45-960 Hz to 9.6 kHz. All other frequency selectors remain the same. When using the
x10 switch, ALWAYS ensure that the amplifiers feeding all speaker systems are turned off or that the input gain
controls on the power amplifiers are turned down before changing the setting of the x10 switch. Not doing so may
send a spurious signal to the outputs of the crossover when the x10 switch is engaged, and may damage speaker
systems which are powered any the time of the spurious signal.
