DOL Extension Box
Technical User Guide
5
Install the extension box so it is not exposed to frost or direct sunlight.
Mount the extension box to the left or the right of the controller.
Extension box left
Controller
Extension box right
Controller
1. Knock out 2 knock-out pieces in the sides of the box (
A
)
or
(
AA
) and the side of the controller.
2. Knock out the required number of knock-out pieces
(B)
in the bottom section of the cabinet and mount the
plastic glands
(C).
3. Prick/drill holes for the 4 screws in the bottom section of the cabinet
(D).
4. Align the box horizontally. Hold the cabinet base against the wall and mark out the 4 screws.
5. Drill 4 x 8 mm holes.
6. Mount the cabinet using the enclosed wall dowels and screws.
7. Place one or more washer(s) under one of the cabinet feet if the wall is not level and the cabinet base
moves.
8. Mount the rubber sleeve
(E)
.
Summary of Contents for DOL
Page 2: ......
Page 10: ...DOL Extension Box 10 Technical User Guide 4 1 Dimensioned sketch...
Page 11: ......
