
6
Technical User Guide
DOL 530/DOL 630 Extension Box
2.2
Mounting of extension box
NOTE
The extension box must be installed where it is not exposed to frost or bright sunlight.
Mount the extension box
to the left or the right of the house controller.
1)
Knock out knock-out pieces in the sides of the box
(A)
and in the side of the house controller.
2)
Knock out the required number of knock-out pieces
(B)
at the bottom of the cabinet and mount the
plastic glands
(C)
.
3)
Prick/drill holes for the four screws
(D)
in the bottom section of the cabinet.
4)
Correct the box to horizontal. Hold the cabinet base against the wall and mark out for the four screws.
5)
Drill four 8mm holes.
6)
Mount the box using the enclosed wall dowels and screws.
7)
Place one or more washer(s) under one of the bottom feet if the wall is not level and the cabinet base
moves.
8)
Mount the rubber sleeves
(E)
.
House controller
Extension box right
Extension box left
House controller