7
SKOPE OD260
Electronic Controller
Service Manual
Faceplate
Because the electronic controller plays such an important role, it’s helpful to
know the parts of the faceplate you may use.
ES
1
2
3
4
5
6
8
7
No.
Item
Description
1
Digital display of cabinet temperature or messages.
The temperature is what the sensor inside the chiller detects,
and not necessarily the product temperature. However, they
may be very close depending on how the controller is set to
sense temperature.
2
Up:
Button. Used for programming.
3
Set (mute):
Button. Press to mute the alarm. Press and hold
to access parameters. Also used for programming.
4
Light (down):
Button. Press to switch the cabinet light on
and off. Also used for programming.
5
Defrost:
Indicator. ON when the defrost is activated. Flashes
when the activation of the defrost is temporarily delayed due
to procedures in progress.
6
Compressor:
Indicator. ON when the compressor and
condenser fan starts. Flashes when activation of the
compressor is temporarily delayed.
7
Fan:
Indicator. ON when the internal cabinet fans are
activated. Flashes when activation of the fans is temporarily
delayed.
8
Alarm:
Indicator. ON when alarm is signalled.
ES
