17
BB380r-2, BB580r-3, BB780r-4
SKOPE Backbar Remote Chillers
To start a manual defrost
Push and hold the
DEFROST
key for more than 2
seconds.
To change a parameter value
1. Enter the programming mode by
pressing and holding both the
SET
and
DOWN
keys for 3 sec.
( and start flashing).
2. Select the required parameter.
3. Press the
SET
key to display the Set value (now only the
LED is flashing).
4. Press the
UP
or
DOWN
keys to change the Set value.
5. Press the
SET
key to store the new value and move to the
following parameter.
6. To exit: Press both the
SET
and
UP
keys, or wait 15 seconds
without pressing any keys.
7. To lock in new parameter value: after one minute operation,
disconnect and reconnect cabinet into the mains power supply.
NOTES:
1. The Set value is stored even when the procedure is exited by
waiting for the time-out to expire.
2. Dependent on customer requirements, the SKOPE electronic
controller has different parameter configurations.
Parameter configuration 160 = Beverage, and 170 = Food.
To establish correct controller parameter configuration, see
label on controller housing.
ELECTRONIC CONTROLLER
4
Summary of Contents for BB380r-2
Page 2: ......
