background image

Safety

Always observe safety precautions when using any electrical appliance. Read these instructions carefully and retain them for future reference.

•    Do not use this appliance for other than its intended use.
•    Do not probe any opening.
•    Only use this appliance with the voltage specified on the cabinet rating label.
•    Ensure the appliance has adequate ventilation as this is essential to economical, high performance.
•    Be careful not to touch moving parts and hot surfaces.
•    For your own safety and that of others, ensure that all electrical work is done by authorised personnel.
•    If the power supply flexible cord becomes damaged, it must be replaced by an authorised service agent or similarly qualified person in order to avoid a 

hazard.

•    Ensure all necessary safety precautions are observed during installation or removal of the refrigeration unit.
•    The appliance is not designed to be stable while in motion. Use extreme caution when moving or transporting it.
•    Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
•    Please contact SKOPE for advice regarding disposal of this appliance.

SKOPE Warranty Protection

Register now for peace of mind

It’s quick and simple. Take a few minutes to register your SKOPE product and enjoy more efficient support plus other 
warranty benefits. When registering, make sure you have your cabinet serial number at hand. 

To register online:

Visit our website at www.skope.com/warrantyprotection then complete and submit the online registration 
form.

or freephone:

1800 121 535 (Australia)
0800 947 5673 (New Zealand) 

Service & Support

We know you will get years of satisfaction from your new SKOPE product when you follow a few simple preventative 
maintenance guidelines.

Helpful information is available on our website 
www.skope.com/serviceandsupport

WARNING

•    Ensure the appliance is disconnected from the power supply before performing any cleaning or maintenance.
•    Do not cover the grilles or block the entry or exhaust of airflow by placing objects up against the refrigeration unit.
•    Should defrosting be necessary, turn off the refrigeration system and allow the ice to melt by air circulation. Do not use mechanical methods 

to remove ice, as this may damage the refrigeration circuit.

•    Do not use any electrical devices or appliances inside the food storage compartment.

This chiller is designed to operate within a specific climatic class environment. 
See the cabinet rating label inside the cooler for climate class number.

The cabinet rating label includes relevant hazard symbols that may be 
associated with the cooler. Refer to the information below for symbol 
description.

Climate class

Ambient temperature

Relative humidity

WARNING

The refrigeration system contains flammable R290 refrigerant. 
Do not tamper with it.

The refrigeration system must only be serviced by qualified 
personnel.

3

25°C

60%

4

30°C

55%

5

40°C

40%

7 (tropical)

35°C

75%

PRN80133 Rev 1.2 Oct. 2018

0070513784

Refrigeration

Refrigeration

Summary of Contents for ActiveCore SKT series

Page 1: ...ation surface must be capable of supporting the loaded cabinet Power Supply Do not overload the power supply Blocking Ventilation Do not store boxes or items in front or on top of the chiller Climate Class The chiller must be installed in an environment within its climate class The climate class is stated on the cabinet rating label inside the chiller and specified on the back page of this user gu...

Page 2: ...oth door brackets Then push the handle down onto the brackets until the handle locks in place 3 Remove the bracket s from the han dle mount by pressing the bracket in and down until it unclips from the handle mount 3 If the handle doesn t lock into place check that the spring clips are pointing up and try again If only one end of the handle locks into place remove the door handle and refit with bo...

Page 3: ...d SKT Clean Coil BME and SKB Clean Filter 1 Unplug the chiller from the power supply 1 Rotate the grille at the bottom of the front kick panel out to gain access to the filter 2 Remove the front panel from the top of the cabinet Lit sign panels also need to be unplugged 2 To remove the filter use the finger loops to pull the filter up and detach from the front kick panel 3 Brush the condenser coil...

Page 4: ...hand To register online Visit our website at www skope com warrantyprotection then complete and submit the online registration form or freephone 1800 121 535 Australia 0800 947 5673 New Zealand Service Support We know you will get years of satisfaction from your new SKOPE product when you follow a few simple preventative maintenance guidelines Helpful information is available on our website www sk...

Reviews: