background image

Radio

8

Traffic information function TP

– Press the button 

 and then the function key 

– The function 

traffic information

 is switched (

on

) or (

off

) using the 

button .

Irrespective of which radio station is heard, an additional receiver part in the unit 
ensures that a traffic information station can always be received as long as the traffic 
information function is switched on.

In the info field of the display, a traffic announcement is shown with 

traffic 

announcement

.

Incoming traffic announcement

If you wish to interrupt the transmission of the traffic announcement, press on the 
button 

 (Read out in display: 

 

cancel

). However the TP function still remains 

available.

A short signal tone sounds if you select a station without TP function when the TP 
function is switched on or if no traffic information station is selected when 
switching on the TP function. Instead of TP 

page 6, fig. 3  

 only two lines are 

displayed in the frame. However the TP function remains switched on. If now you 
change to another audio source (e.°g CD), the unit in the background automatically 
switches over to another TP station and the traffic announcements of the station 
are replayed.

Displaying TMC traffic reports

TMC traffic reports are used during route guidance, depending on set-up 
for the automatic optimization of the route, to report possible traffic 
problems.

– Press the function key 

 to display the current traffic reports in 

a list.

– You can call up further information in addition to the announced 

reports with the button 

. You can be informed about the traffic situ-

ation on your route and if necessary change the route when the route 
guidance begins.

During route guidance all set-up depending TMC traffic reports are displayed in the 
surrounding area of the location or only those specified on the calculated route list.

Note

During route guidance all set-up depending TMC traffic reports are displayed in 

the surrounding area of the location or only those specified on the calculated route 
list.

The unit has a continuous background of TMC traffic reports providing a TMC 

station at the current location can be received. The station you are listening to does 
not have to be a TMC station.

TMC traffic reports can only be evaluated and stored by the unit if the naviga-

tion data for the currently driven area is stored in the unit memory or can be called 
up via an inserted navigation CD.

The quality of the dynamic route guidance depends on the transmitted traffic 

announcements. The radio stations broadcasting this information are responsible 
for the content.

RADIO

SETUP

A

1

A

1

A

D

TRAFFIC

A

1

s28k.book  Page 8  Friday, May 16, 2008  10:17 AM

Summary of Contents for RADIO NAVIGATION SYSTEM CRUISE - FOR FABIA





















Reviews: