manualshive.com logo in svg

Skoda OCTAVIA, Owner'S Manual

Share
Download
Skoda OCTAVIA Owner'S Manual Download Page 127

Operation

Fig. 145 

Display

Vehicles with manual transmission

The engine is automatically switched 

off

 as soon as the vehicle comes to a

halt, the shift lever is moved into neutral and the clutch pedal is released.
The engine is automatically 

started

 as soon as the clutch pedal is depressed.

Vehicles with automatic transmission

The engine is automatically switched 

off

 as soon as the vehicle comes to a halt

and the brake pedal is operated.
The engine is automatically 

started

 as soon as the brake pedal is released.

Conditions for the system function

The following conditions must be met for the system to function correctly.

The driver's door is closed.
The driver has fastened the seat belt.
The bonnet is closed.
The driving speed was higher than 4 km.h after the last stop.

System status

The system status is shown in the display when the vehicle comes to a halt

» Fig. 145

.

The engine is automatically switched off; when the vehicle moves off, the
ignition process will be automatically initiated.
The engine is not automatically switched off.

Reasons for the engine running

It may be essential for the engine to keep running when the vehicle comes to
a halt, for the following reasons.

▶

The engine temperature for the proper function of the system has not yet
been reached.

▶

The charge state of the vehicle battery is too low.

▶

The current consumption is too high.

▶

High air-conditioning or heating capacity (high fan speed, big difference be-
tween the desired and actual interior temperature).

When the engine is shut-down automatically and the system detects that the
engine is required such as when the brake pedal is pressed repeatedly then
the system automatically starts the engine.

Infotainment display

Information about the current status of the system can be displayed in the In-
fotainment display 

» 

Owner´s Manual Infotainment

, chapter 

CAR - vehicle set-

tings

.

Note

■

If the vehicle remains outdoors for a long time in minus temperatures or in

direct sunlight, it can take several hours until the internal temperature of the
vehicle battery reaches a suitable temperature for proper operation of the
START STOP system.

■

If the driver's seat belt is removed for more than approx. 30 seconds or the

driver's door is opened during stop mode, the engine will have to be started
manually.

■

No automatic engine shut-down takes place when a vehicle with 

automatic

transmission

 is moving at low speed (e.g. during a traffic jam) and remains sta-

tionary after pressing the brake pedal lightly. Automatic engine shut-down
takes place if you press the brake pedal down with more force.

■

For vehicles with 

automatic transmission

 there is no automatic engine shut-

down when the system detects a manoeuvring action due to a large steering
angle.

125

Starting-off and Driving

Summary of Contents for OCTAVIA













































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands