Skoda OCTAVIA, Owner'S Manual

Page: 111 / 268

Dividing the luggage compartment
Fig. 129
Dividing the boot with variable
loading floor
The luggage compartment can be divided with the variable loading floor in the
lower and upper position.
›
Raise the rear of the variable loading floor by the handle
A
» Fig. 129 .
›
Push the rear edge of the variable loading floor into the grooves
B
in the
direction of the arrow.
The variable loading floor is secured against movements in the grooves
B
.
Net partition

Introduction
This chapter contains information on the following subjects:
Using the net partition
109
Removing and refitting the net partition housing 110
The net partition can either be extracted from behind the rear seats or behind
the front seats.
This chapter describes the procedure for extracting and rolling up the net par-
tition behind the rear seats.
Installing and removing the net partition from
behind the front seats is carried
out in a similar way as behind the rear seats. Before pulling out the net parti-
tion, the rear seat backs are to be folded forwards. After rolling up the net par-
tition into the housing, the rear seat backs are folded back
» page 87 .
Using the net partition
Fig. 130 Open part of the roll-up luggage compartment cover / release
lever
Fig. 131 Net partition behind the front seats in the pulled-out state
Removing the net partition behind the rear seats
›
Fold out part of the roll-up luggage compartment cover
A
in the direction of
the arrow » Fig. 130 .
›
Pull out the net partition at the upper crossbar
C
from the housing
D
» Fig. 131 .
›
Hook the crossbar into one of the receptacles
E
.
›
On the other side, press on the crossbar and hook it into the appropriate re-
ceptacle
E
.

109
Transporting and practical equipment