Heating and air conditioning system
114
– In the menu
Aux. Heating
select the menu
Mode
.
– In the menu
Mode
select the desired mode
Heating
or
Ventilation
.
Programming
For the programming of the auxiliary heating (auxiliary heating and ventilation) in
the menu
Aux. Heating
there are three pre-set times:
•
Pre-set time 1
•
Pre-set time 2
•
Pre-set time 3
In each pre-set time, the day (if necessary each day = daily) and the time (hour and
minute) can be set for the operating period of the auxiliary heating and/or ventila-
tion.
If you leave the pre-set menu by selecting menu
Back
or do not operate the display
for longer than 10 seconds, the set values are stored, but the pre-set time is not
active.
Both other pre-set times can be programmed and stored in the same way.
If you select the menu
Activate
after setting the desired values,
Pre-set time
(weekday, hours, minute) activated!
is displayed in the display and the set pre-
set time is active.
Only one programmed pre-set time can be active.
The last programmed pre-set time remains active.
The active pre-set time can be changed in the menu
Aux. Heating
in the menu
Activation
by selecting a pre-set time.
The prerequisite for the correct switching on of the auxiliary heating (auxiliary
heating and ventilation) according to the programmed pre-set time is the correct
setting of the current time
⇒
page 14 and weekday
⇒
page 113.
If the system is running, a warning light in the button for direct switching on/off of
the auxiliary heating
lights up.
The running system deactivates after expiration of the operating period or is deac-
tivated earlier by pressing the button for direct switching on/off of the auxiliary
heating
⇒
page 114.
The deactivation of a desired pre-set time can be performed by selecting the menu
Deactive
in the menu
Active
.
It is possible to re-establish the factory setting using the menu
Factory setting
in
the menu
Aux. Heating
.
Direct switching on/off
Fig. 129 Button for direct switching on/off of the auxiliary heating (auxiliary heating and
ventilation) on the operating part of the Climatic
The auxiliary heating (auxiliary heating and ventilation) can be switched on or off at
any time
directly
using the button
on the operating part of the Climatic
⇒
fig. 129
, if necessary the operating part of the heating
⇒
page 100, fig. 119
or the
operating part of the Climatronic
⇒
page 109, fig. 125
.
The auxiliary heating system (auxiliary heating and ventilation) switches off auto-
matically after expiration of the set operating period in the menu
Running time
, if
it is not switched off beforehand by you.
NKO A5 20 MR08.book Page 114 Wednesday, April 11, 2007 2:54 PM
Summary of Contents for Octavia 2007
Page 1: ...SIMPLY CLEVER kodaOctavia OWNER S MANUAL 29 3 2007 13 44 07 29 3 2007 13 44 07...
Page 6: ...Contents 5 NKO A5 20 MR08 book Page 5 Wednesday April 11 2007 2 54 PM...
Page 153: ...Communication 152 NKO A5 20 MR08 book Page 152 Wednesday April 11 2007 2 54 PM...
Page 279: ...Technical Data 278 NKO A5 20 MR08 book Page 278 Wednesday April 11 2007 2 54 PM...