Skoda Fabia II 2007, Workshop Manual

Page: 33 / 165

1.7 Summary of components - foot controls (Fabia II 2011 ►; Roomster 2011
►; Rapid NH 2013 ►)
Note
♦
Summary of components - Hydraulics ⇒ page 51 .
♦
After the battery earth strap is disconnected and connected, carry out additional operations ⇒ Electrical
System; Rep. gr. 27 .
♦
Grease all bearing points and contact surfaces with Polycarbamide Grease - G 052 142 A2- .
1 - Front wall
❑ with mount for bearing
bracket and master cyl‐
inder
2 - Bushing
❑ for the top location hole
in the bracket
❑ The bushings for the
bottom location hole in
the bracket are located
in the master cylinder
3 - Bearing bracket
❑ removing and installing
with master cylinder
⇒ page 38
❑ removing and installing
without master cylinder
⇒ page 43
4 - 25 Nm
❑ for bracket on front wall
❑ self-locking
❑ 3 pieces
❑ always replace ⇒ Elec‐
tronic Catalogue of
Original Parts
5 - Clutch pedal switch - F36-
❑ removing and installing
⇒ page 31
6 - Crash strut
❑ is attached to the steer‐
ing column
❑ different versions ⇒
electronic catalogue of
original parts
❑ removing and installing ⇒ page 32
7 - Screw
❑ for crash strut -Pos. 6- at steering column
❑ Tightening torque:
♦ Version with two screws - 9 Nm
♦ Version with one screw - 20 Nm
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
29