ASSEMBLY
B
Push Button Attachment
C
C
ONLY secure stakes where indicated above.
SIDE
Remove the Ground Stakes and detach the net from the frame. Place the ground stakes into the
carry bag.
WARNING: Soccer Goal is under tension when assembled. Please take the utmost care when
releasing the tension during disassembly. Failure to do so may result in injury.
Hold one pin in one hand and one Tension-Tite™ Arm Pole in the other while pulling the pin out.
Repeat on the other side. Remove the Net webbing attachments from each side of the frame. If
needed, air dry the net before you fold and place it into the carry bag.
Pull the Tension-Tite Arm Poles out of each side of the base frame and unlink and fold them down
to store.
NOTE: Store Tension-Tite Arm Pole in the carry bag with the round tops facing away from each
other. Unlock the push buttons on the Base Frame to unlink the frame. Fold and store in
carry bag.
STORING YOUR
QUICKSTER
®
Webbing attachment
2.
2.
2.
1.
1.
1.
B
C
A
STEP 1
BASE FRAME & TENSION-TITE
™
ARM POLE
STEP 3
SECURE THE SOCCER GOAL TO THE GROUND
NOTE: Base Frame and Tension-Tite arm poles come pre-attached by elastic.
1
–
Layout one Tension-Tite Arm Pole (C) and link together to form a straight pole. Repeat with
second Tension-Tite Arm Pole. Layout Base Frame (B) and link the frame together. Make sure to
secure the poles with the push buttons.
WARNING: To avoid pinching, use caution when assembling the push button.
NOTE: The slight bowing on the Base Frame is part of the Tension-Tite system design.
2
–
Slide the Tension-Tite™ Arm Poles into each side of the Base Frame.
NOTE: Ensure arm poles are fully inserted. Failure to do so may result in damage to the Soccer Goal.
1
–
Place your Soccer Goal in the desired location. Make sure that you are on level ground. Secure the goal into the
ground with the included Ground Stakes (D). If you are unable to press them into the ground with your hand or
foot, you may use a mallet.
NOTE: Do not use Ground Stakes on the back of the base frame. Poles will bend and tension system will not
function properly.
NOTE: Care should be taken when pressing in the ground stakes. Poles can be bent if driven too far into the
ground or hard surface.
CAUTION: Make sure the Soccer Goal is secured into the ground before play. During play, make sure that the
Ground Stakes are secured regularly as a loose Ground Stake may cause injury.
STEP 2
CONNECT THE NET TO THE FRAME
1
–
Unfold the Net (A) and make sure that the top Quickster logo on the net is facing away from the frame.
Connect the net loops on the bottom of the net to each side of the frame.
2
–
Slide the pin at the top of the net into the top of the Tension-Tite Arm Pole. Repeat on the other side.
3
–
Secure the net to the frame by wrapping the velcro straps around both the Tension-Tite Arm Poles
and the Frame Base.
NOTE: Check the frame to make sure it is
securely and fully assembled with the net
before securing to the ground.
SKLZ offers a limited 1-year warranty for this product,
visit SKLZ.com for full warranty details and to register
your product.
2081 Farday Ave Carlsbad, CA 92008 | 877.225.7275 | SKLZ.com
US Patent #8,246,496 | Made in China
SoccerGoal_ALL_Instr_2-sided_8.5x11_sV3.indd 2
5/15/14 4:31 PM
