PRO MINI HOOP SYSTEM
SKLZ.com
Red Base Cap
Top Base Plate
Bottom Pole (2)
Middle Pole (3)
Top Pole (4)
Rim (12)
Height Adjustment Pole (7)
Height Adjustment Handle (8)
Lower Backboard Brackets (9)
Upper Backboard Brackets (10)
Backboard (11)
Locking Pin
Base Arm (5)
Base Arm (6)
Base (1)
PARTS:
TOOLS:
HARDWARE:
BEFORE YOU BEGIN:
» Make sure you have all of the Pro Mini Hoop System components. Please contact SKLZ
customer service toll free at 877-225-7275 x128 if you are missing anything.
» Read all setup and usage instructions carefully.
» You will need water or up to 130 lbs of sand to fill the base.
» Do not use if base is not full of sand and/or water.
» Adult setup required.
» Do not hang on the rim.
1 – Base
7 – Height Adjustment Pole
8 – Height Adjustment Handle
9 – Lower Backboard Bracket (2)
10 – Upper Backboard Bracket (2)
11 – Backboard
12 – Rim
Rim Plate
Red Base Cap
Locking Pin with
Safety Chain (2)
Top Base
Plate (2)
Bottom Base
Plate (2)
1” Bolt, Lock Washer,
Washer –
Attaches bottom pole to base
1.25” Hex Bolt (4),
Nut (4), Washer (8)–
Attaches base arms to base
3.25” Hex Bolt (3),
Nut (3), Washer (6)–
Attaches brackets to
height adjustment handle
and to top pole
2.5” Hex Bolt,
Nut, Washers–
Attaches arm braces to
bottom pole
1.5” Bolt (3),
Nut (3), Washer (3)–
Attaches rim to backboard
1.5” Bolt with Blue
adhesive (2),
Lock Washer (2)–
Attaches poles together
1.5” Hex Bolt (4),
Nut (4), Washer (8)–
Attaches backboard to brackets
1.75” Hex Bolt,
Nut, Washers–
Attaches height adjustment
pole to top pole
2-Sided
Wrenches (2)
Mini Basketball
(7” in dia.)
Net (not shown)
4 – Top Pole
2 – Bottom Pole
3 – Middle Pole
5 – Base Arm (R)
6 – Base Arm (L)
Front
Locking Pin Attached
Mini Basketball
(air pump not included)