IN THE BOX
GETTING STARTED
VISIT SKLZ.COM TO LEARN MORE
PERIMETER NET
F
28.5” L-SHAPED POLE (3)
B
28.5“ L-SHAPED TUBE (3)
A
17.5” I-SHAPED TUBE (4)
C
20.5” ANGLED CONNECTOR FITTING
LEFT
D
RIGHT
E
NET HOOKS (24)
G
H
GROUND STAKES (4)
RED TARGET RIBBON
I
1. Slide 12 Net Hooks (part G) onto one of the L-Shaped
Tubes (part A).
2. Then take one of the other two remaining L-shaped Tubes
(part A) and slide 5 Net Hooks onto the tube, followed by 1
Ground Stake (part H), 2 more Net Hooks, 1 more Ground
Stake and finally 5 more Net Hooks.
3. Follow the illustration in diagram #1 to assemble the rest of
the frame (The tube with the Ground Stakes attached will
be the base of the frame).
BUILD THE YOUTH PITCHBACK FRAME
1. Attach the Red Target Ribbon (Part I) by
weaving the ribbon through the net and ty-
ing off at the ends. See diagram #3
ATTACH THE TARGET RIBBON
1. Spread out the Net Hooks (Part G) along the frame,
making sure they are all still facing the same way.
2. Attach the net by following the numbered sequence
illustrated in diagram #2. Start by taking the Net (Part F) and
attaching one of the squares with a red tab to the top left net
hook. Skip one net square between the top and
side hook and attach the side hook for this corner.
3. Find the square with the other red tab and repeat this
procedure for the top right corner.
5. Attach the net to the remaining two corners, making sure
that each corner of the net is attached to two net clips.
6. Space the remaining net clips evenly along each side.
Attach the net to all remaining net clips.
Note:
Study the net clip configuration as shown in diagram #2.
This represents the best clip positioning for
optimum performance.
ATTACH THE NET
DIAGRAM 1
DIAGRAM 3
DIAGRAM 2
H
A
A
B
B
C
C
D
E
H
H
1
5
2
6
8
3
7
4
G
Thread Top Bar
with 12 Hooks
Thread Bottom Bar
with 12 Hooks
G
B
A
C
C
G
G
YouthPitchback_GettingStarted_8.5x11_v4.indd 2
6/4/19 9:52 AM
