Operation and Installation CD401LR
Edition: 2013-11-05 Rev: 1.13
Page 15 of 28
CONFIGURING OF DATA SCREENS
The 3 user programmable screens can be set up using
the Config (CONFG) menu. This submenu allows the
user to select one of the three displays, and on entering
the config screen, the user can change the data type
to be displayed in each of the 4 screen positions. Up
and down will change the data type, SET will move to
the next screen position. If text (TXT) is selected on
one of the lines, the display will show 4 lines of data
in 5 point font, otherwise 3 lines of 7 point font will be
used.
Placing TXT in the bottom 4
th
line or 3
rd
and 4
th
line will cause the data to spread
out showing fewer data points. The system will not allow you to mix speed data
from different sources on the same screen. Having 2 TXT lines after each other
will also rearrange the positioning.
Note
: The Speed log repeater have one screen which indicates just the primary
data. This screen is fixed and cannot be adjusted.
The non-active parameters will continue showing the dimmed present data,
when not selected.
Example:
TXT
STW
TXT
STW
TXT
STW
STWL =
10,1 &
STW L =
10,1 &
STW L =
10,1
TXT
STW T
0,2
STW T
0,2
TXT
TXT
Trip
T
L
90683
