background image

Operation and Installation CD401LR

Edition: 2013-11-05 Rev: 1.13

Page 13 of 28

CHAPTER 2

s

etting

 

up

 

the

 C

ompaCt

 d

isplay

______________________________________________________________

PRINCIPLES

The Compact Display is a flexible dot matrix LED display designed to display 

navigation data. The Speed log repeater can be user programmed to show 

most kinds of numerical data, from NMEA messages or self generated. It can 

also be used as a primary sensor display for speed logs showing the speed 

values produced by the sensor, or as a simple repeater. The Compact with its 

JB60CD box meets all the requirements of a primary device both functionally 

and electrically. On its own it meets the requirements as a repeater. 

The Compact has three user definable alphanumeric displays, each allowing up 

to 4 parameters to be displayed. When the device is used as a primary device 

some of these screens will be fixed.

RUN SCREENS

 

The unit starts up in runtime mode. By pressing menu, the preset user screens 

can be selected. Some of the menu screens (i.e alarms) are also available in 

the runtime mode.

The unit can be dimmed in any of the runtime screens using the UP (

) and 

DOWN (↓) buttons. If Trip/Total are selected as a displayed parameter, they can 

be toggled using the SET button.

Summary of Contents for EML224 Compact





























Reviews: