- 7 -
Remove the plug for oil filling at the top of the gear and replace it with an air-
escape valve.
Fig. 5
Air-escape valve for gear
Grease the hollow shaft of the gear in order to ease the mounting on the mixer
auger.
Mount the gear, figure 6 pos. 2, on the shaft of the mixer auger and secure it
with disc and bolt. Connect the gear to the instantaneous bracket, pos. 5, with
rubber bushings, pos. 4, and distance pipe, pos. 3. Secure the through-going bolt
with self-locking nut, pos. 6, that is only tightened a bit.
(Remember! Check
the gear oil level before starting, see figure 14!)
Fig. 6
Mounting of instantaneous bracket
