GENERAL
Thank you for choosing the qubeAVgo audio-video system. As a developer and
manufacturer of simulation technology, we feel it is important to provide a training
experience for all participants and thus generate added value in many areas of the
learning cycle.
Don't just think of yourself as a user of an existing solution, think of yourself as part of
a development process. We would like to ask you to inform us about your needs and
optimizations, so that we have the possibility to further develop the existing product
with your support. We thank you in advance for your support and wish you much joy
and success in your trainings.
SCOPE OF DELIVERY
The qubeAVgo system was delivered to you with the following components:
•
qubeAVgo backpack
•
iPad with configured qubeAVgo application
•
Apple iPad Pen
•
IP camera configured with power supply
•
LAN cable
•
Router configured with power supply
•
Microphone (interface)
•
Preamplifier / Signal Converter
•
Operating instructions
•
Router / network card with all information (passwords)
SETTING UP THE qubeAVgo SYSTEM
You will receive your qubeAVgo system fully configured.
It only takes a few steps and you can get started with your AV system.
1. Connect the supplied wireless router to a power source (wall outlet).
2. Connect the supplied IP camera to a power source (wall outlet).
3. Start the iPad and make sure it is on the network of the router that came with it.
If not, go to Settings WLAN and select the preconfigured network (network
name and password can be found on the enclosed router / network card).
4. If all components are in the network, you can start directly.
Note: You will achieve higher connection stability if you connect the IP camera to the
router. Use the supplied LAN cable for this purpose.