Skil Masters 3100, Original Instructions Manual

Page: 17 / 21

17
APPLICATION ADVICE
• Special workpieces
- ensure that curved or round workpieces are
especially secured against slipping
- at the cutting line no gap may exist between the
workpiece and the fence or saw table
- if necessary, fabricate a special fi xture
• For working with fl oor mouldings illustration ≤ can be
used as reference
• Always face the good side of the workpiece down to
ensure minimum splintering
• Only use sharp saw blades of the correct type
- quality of cut improves by the number of teeth
- carbide tipped blades stay sharp up to 30 times
longer than ordinary blades
• Vibration level
The vibration emission level stated at the back of this
instruction manual (indicated by an asterisk) has been
measured in accordance with a standardised test given
in EN 60745; it may be used to compare one tool with
another and as a preliminary assessment of exposure to
vibration when using the tool for the applications
mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories, may
signifi cantly
increase the exposure level
- the times when the tool is switched off or when it is
running but not actually doing the job, may
signifi cantly
reduce the exposure level
! protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
MAINTENANCE / SERVICE
• Always keep tool and cord clean (especially the
ventilation slots at the back-end of the motor housing)
! disconnect the plug before cleaning
• Clean saw blade immediately after use (especially from
resin and glue)
! the saw blade becomes very hot during use;
do not touch it before it has cooled down
• If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should be
carried out by an after-sales service centre for SKIL
power tools
- send
the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of
the tool are listed on www.skilmasters.com)
ENVIRONMENT
• Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
- in observance of European Directive 2002/96/EC on
waste of electric and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol ∞ will remind you of this when the need for
disposing occurs
F
Scie à onglets combinés 3100
INTRODUCTION
• Cet outil est une machine fi xe, conçue pour effectuer
dans le bois des coupes droites longitudinales et
transversales ainsi que des angles d’onglet (il est
possible de réaliser des angles d’onglet horizontaux de
-45° à +45° et des angles de biseau verticaux de 0° to
45°)
• Lisez et conservez ce manuel d’instructions 2
SPECIFICATIONS TECHNIQUES 1
ELEMENTS DE L’OUTIL 4
A Levier de manoeuvre
B Goupille de verrouillage pour le transport
C Levier de sécurité
D Poignée de transport
E Poignée de blocage (angles d’onglet)
F Bride de blocage (angles d’onglet)
G Trous de fi xation
H Sac à poussière
K Rallonges
L Boutons pour montage des rallonges
M Collier de serrage pour montage de la pièce
N Protection
P Indicateur de l’angle d’onglet
Q Bouton de blocage (angles de biseau)
R Indicateur de l’angle de biseau
S Ouverture du rayon laser
S1 Laser à enclenchement marche/arrêt
T Interrupteur marche/arrêt
V Clé de lames
W Protège-main
X Bouton de blocage de l’arbre
Z Plaque amovible