CHECKING PRODUCT RECEIVED
Upon receiving unit, inspect if for any shipping damage. Claims for damage, either
apparent or concealed, should be filed immediately with the shipping company. Check
condensing unit electrical characteristics and accessories to determine if they are
correct. Check system components (evaporator coil, condensing unit, evaporator
blower, etc. to make sure they are properly matched.
Remove shipping bracket under compressor if supplied. With the thermostat in the
“Off” position, turn the power on to the furnace and the condensing unit. Before
starting condensing unit allow 12 hours time to elapse, giving the crankcase heater (if
provided) time to drive refrigerant from the compressor, thus preventing damage
during start-up. Start the condensing unit and the furnace with the thermostat. Make
sure the indoor air handler is operating.
