6
Copyright by SKIDATA AG 2004
Connector for External Antenna
(use connector RIACON Type 166)
Terminal
pin #
Signal
Wire
Colours
Function
1 ANT
13
MHz
Coaxial
cable inside
External 13 MHz antenna
2 GND
Coaxial
cable shield
3 ANT
122
kHz
White
External 122 kHz antenna
4 GND
Brown
5
LED-R
Yellow
LED, red or green
6
LED-G
Green
or orange (both)
Figure 10
Main board
Cable tie
Metal tongue
Coaxial cable RG 174 (50
for 13 MHz antenna
Ω)
Cable (LifYCY, 2x2x0.25 mm²)
for 122 kHz antenna and LEDs
Connector
for external antenna
To connect and fasten the coaxial cable
-
Insert metal tongue between cable shield and
insulation
-
Fasten cable tie
SKIDATA AG
• Untersbergstraße 40 • A-5083 Gartenau
[p] +43 6246 888-0 • [f] +43 6246 888-7 • [e] [email protected] • [w] www.skidata.com
Version 1.0 • 2003-01-29 • Copyright © 2004 by SKIDATA AG
This documentation may contain representations of registered product or service trademarks owned by SKIDATA AG or third parties, as well as references
to proprietary know-how protected by copyright laws or other legal provisions.
In any case the intellectual property rights remain exclusively with their respective owners.
This document is subject to change without notice. It cannot form part of a binding contract.
