SKI 18BDC, Owner'S/Operator'S Manual

Page: 13 / 53

8
KSi 18BDC CONVEYOR
USER'S MANUAL
KSi will not be liable for failure of the equipment due to poor or improper electrical power installation.
Wires which are too small deliver insufficient voltage causing the motor to overload or burn out.
Improper or inadequate wiring can kill or cause fires.
All electrical devices used on this machine shall be arranged to operate in a “fail safe” manner, that is, if
power failure or failure of device occurs, a hazardous condition must not result. This means, the machine
must not restart by itself after a power failure etc. when power returns.
A means to lock out power must be provided at time of installation to prevent inadvertent starting of the
equipment.
Personal Protective Equipment (P.P.E.)
1. The proper personal protective equipment should be worn at all time.
2. Always wear safety glasses when in the work area.
3. Proper footwear should be worn during the installation process, as well as
any maintenance functions.
4. It is recommended to wear protective gloves during the installation process,
as well as any maintenance functions. It is recommended to wear them also
when removing any covers.
5. The use of fall protection is required at all times during the installation
process, as well as maintenance functions.
6. The operator should never wear jewelry.
7. Loose-fitting clothes should not be worn around moving parts on conveyors
or equipment. Any clothing that becomes loosened should be tucked in
tightly.
8. Loose or dangling shoe strings should be tucked in.
9. Long hair should be tied up and/or back.