Ski-Doo Scandic SWT V800, Operator'S Manual

Page: 81 / 123

VEHICLE CARE
Post-Operation Care
Shut off the engine. Install rear of ve-
hicle on a wide-base snowmobile me-
chanical stand.
Remove snow and ice from rear sus-
pension,
track, front suspension,
steering mechanism and skis.
We recommend to cover your snow-
mobile
when leaving it outside
overnight or during extended periods
of inactivity. This will protect it from
frost and snow as well as help retain its
appearance.
Vehicle Cleaning and
Protection
Remove any dirt or rust.
To clean the entire vehicle, use only
flannel cloths or equivalent.
NOTICE
It is necessary to use flan-
nel cloths or equivalent on wind-
shield and hood to avoid damaging
further surfaces to clean.
To remove grease, oil and grime, use
BRP HEAVY DUTY CLEANER (P/N 293
110 001) .
NOTICE
Do not use Heavy duty
cleaner on decals or vinyl.
To remove stubborn dirt from all
plastic and vinyl surfaces, use XPS
MULTI-PURPOSE CLEANER (P/N 219
701 709).
To remove scratches on windshield or
hood use SCRATCH REMOVER KIT
(P/N 861 774 800).
NOTICE
Never clean plastic parts
or hood with strong detergent, de-
greasing agent, paint thinner, ace-
tone, products containing chlorine,
etc.
Clean sheaves of both pulleys using
PULLEY FLANGE CLEANER (P/N 413
711 809).
Inspect the hood and repair any dam-
age.
Touch up all metal spots where paint
has been scratched off. Spray all metal
parts including ski legs using XPS
LUBE (P/N 293 600 016).
Wax painted portion of the vehicle for
better protection.
NOTE: Apply wax on glossy finish
only. Protect the vehicle with a cover
to prevent dust accumulation during
storage.
_______________
79