Ski-Doo MX Z X 600 RS, Operator'S Manual

Page: 76 / 127

MAINTENANCE PROCEDURES
mmo2008-008-005_a
TYPICAL
1. Air filter
If the filter has to be cleaned or re-
placed, see an authorized Ski-Doo
dealer.
Engine Coolant
WARNING
Never open radiator cap when en-
gine is hot.
Engine Coolant level
Check coolant level at room tempera-
ture. Liquid should be at cold level line
(engine cold) of coolant tank.
NOTE: When checking level at low
temperature it may be slightly lower
then the mark.
mmo2007-009-010_a
TYPICAL
1. Coolant tank
2. COLD LEVEL line
If coolant is low, remove the coolant
tank cap and add the recommended
engine coolant.
WARNING
Do not open coolant tank cap when
engine is hot.
Recommended Engine Coolant
Always use ethylene-glycol antifreeze
containing corrosion inhibitors specifi-
cally for internal combustion aluminum
engines.
Cooling system must be filled with
BRP PREMIXED COOLANT (P/N 219
700 362) or with distilled water and an-
tifreeze solution (50% distilled water,
50% antifreeze).
Exhaust System
Exhaust System Verification
The muffler tail pipe should be cen-
tered with the exit hole in the bottom
pan. Exhaust system must be free of
rust or leaks. Make sure that all parts
are securely in place.
Check retaining springs condition and
replace if necessary.
The exhaust system is designed to re-
duce noise and to improve the total
performance of the engine. Modifica-
tion may be in violation of local laws.
NOTICE
If any exhaust system
component is removed, modified
or damaged, severe engine damage
may result.
Spark Plugs
Spark Plug Removal
1. Open LH side panel, refer to CON-
TROLS, INSTRUMENTS AND
EQUIPMENT
.
2. Remove belt guard, refer to
DRIVE
BELT GUARD REMOVAL .
3. Carefully remove spark plug wire
cap with a twisting and pulling mo-
tion.
74
______________