25
SKF TKSA 31 & TKSA 41
4.3 Horizontal correction – Top view
If the horizontal results are out of tolerance, you need to correct the value by moving the movable machine.
The system calculates the correction values at the feet.
•
Start by rotating the MU at the 3 o’clock (+90°) or 9 o’clock (-90°)
position and validate.
•
The arrows show in which direction the motor has to be moved.
-
Up
arrow means the motor has to go
to the right.
-
Down
arrow means the motor has to go
to the left.
•
Coupling values are a direct measurement.
•
Feet values are calculated with the distances previously entered.
•
Coupling and feet values are
updated live
on the screen.
- Use the Pause button to freeze the live update.
- This can be useful to remember the correction values.
•
STOP when the coupling values are within tolerance and
both
Green marks
are shown.
IMPORTANT:
•
Start by moving the motor side with the highest correction value.
•
Tighten the bolts when finished with the horizontal correction.
Summary of Contents for TKSA 31
