SKF TKBA 10, Instructions For Use Manual

Page: 15 / 108

13 SKF TKBA 10 & 20
8. Troubleshooting and maintenance
No laser line
• Check that the batteries are inserted correctly in the transmitter unit.
• Replace the batteries.
• Ensure that the laser window in the transmitter unit is not obstructed
by dirt. If necessary, clean with cotton cloth.
Lost calibration
If the tool loses its calibration, return the complete tool to SKF for repair.
Heavy impacts
The transmitter unit is equipped with sensitive optical components. Heavy
impacts can affect the function and accuracy of the unit. Handle with care
and ensure that the laser window is kept clean and free from dirt.
9. Technical data
Designation TKBA 10 TKBA 20
Transmitter Unit
Type of laser Red laser diode Green laser diode
Laser line
length 2 m at 2 m
(6.6 ft at 6.6 ft) 2 m at 2 m
(6.6 ft at 6.6 ft)
Measurement
Accuracy
Angular Better than 0,02°
at 2 m (6.6 ft) Better than 0,02°
at 2 m (6.6 ft)
Measurement
Accuracy Offset Better than 0,5 mm
(1/50" in.) Better than 0,5 mm
(1/50" in.)
Measurement
distance 50 mm to 3 m
(2 in to 10 ft) 50 mm to 6 m
(2 in to 20 ft)
Control Laser ON/OFF rocker switch Laser ON/OFF rocker switch
Housing
Material Aluminum,
Powder coat inish Aluminum,
Powder coat inish
Transmitter
unit
dimensions 169
™
51
™
37 mm
(6.65
™
2.0
™
1.5 in.)
169
™
51
™
37 mm
(6.65
™
2.0
™
1.5 in.)
Transmitter
unit weight 365 g
(0.8 lbs) 365 g
(0.8 lbs)
Receiver Unit
Housing
Material Aluminum,
Powder coat inish Aluminum,
Powder coat inish